Lorine Mason - Designer, Author, Innovator

Archive for Sewing for Family, Friends and Pets

Monogrammed Bunny Bags

· Comments (0)

Monogrammed Bunny Bags Favecrafts

Supplies for Monogrammed Bunny Bags:

Fairfield oly-fun in a variety of colors

Stick fusible web

14 inches of 1/4 inch ribbon for each bag

Sizzix® Big Shot™ die cut machine and lettering dies

Sewing machine and basic sewing supplies

How to make Monogrammed Bunny Bags:

Note:  All seams are 1/4 inch

Cut four 7 inch by 9 inch rectangles, two from white oly-fun (lining) each from two additional colors.

Cut four ears using the pattern, two from white and two from another color of your choice.

Cut out two 1 inch by 5 inch rectangles for the ribbon channels from white oly-fun.

Center white ears on top of  the larger ear cut out and stitch around the outside edge of the white. Fold the ear in half and stitch the dart closed. Repeat to create the second ear.

Place the ears onto the of the back bag pieces and baste in place. Cover with one of the lining pieces right sides together and stitch across the top edge. Turn right sides out and press.

With right sides together, stitch the bag front and lining pieces together along the top edges. Turn right sides out.

Press fusible web to the back of  oly-fun and cut out desired monograms using the die cut machine and dies.  Alternately you may hand cut monograms or other decorative shapes. Fuse to the bag front.

Center one of the drawstring channels on top of the bag front and top stitch along either side. Repeat to add the remaining ribbon channel to the bag back piece.

With right sides together, stitch the bag front and backs together along the sides and bottom edges.

Fold each of the corners together matching the bottom and side seams and draw a line 1 inch in from each of the corners. Stitch along these drawn lines. Turn the bag right side out.

Insert the ribbon through the channels, fill with goodies and tie a bow.

For a full size pattern of the bunny ears, contact Lorine directly at masoncreation@msn.com

 

 

 

Monogrammed Bunny Bags

Aluminor Tote Bag

· Comments (0)

Aluminor Tote Snapshot

Aluminor Tote Bag

Aluminor Gold & Silver – 1 ½ yards each

Sewing & Craft Tape – ¼ inch wide by Prym

Snap Fastener – Size 10 by Prym

Black Thread

Plastic or other stiff material for bag bottom support

Sewing Machine

Getta Grip® Sewing Clips by Prym

Sheer Pressing Cloth by Prym

Basic Sewing, Cutting, Measuring & Pressing Tools

Cut the following:

Gold                                                                                                      Silver

One 16 inch x 30 rectangle –  bag bottom                              Two 20 inch x 30 – front and back of the tote

One 8 ¼ inch x 20 ½ inch rectangle – front pocket

One 12 inch square –  inside pocket

Two 6 inch x 30 inch rectangles –  handles

All seams are ½ inch unless otherwise notes. Use sewing & craft tape to secure items before sewing whenever possible. Sewing clips should be used in place of pins so as not to leave marks in the fabric. Always use a pressing cloth between the fabric and your iron. Iron should be on synthetic setting.

Using the diagrams as a guide; cut notches into front and back sections of the tote and tote bottom. Diagram A

Press sewing tape to the wrong side of the tote bottom along the inside edges. Remove the paper backing from the tape and turn under both edges ½ inch, pressing tape to secure. Apply tape to the top of the folded edge. Diagram B

With wrong sides together stitch the tote front and back together along the bottom edge. Use the pressing cloth and press the seam open. Diagram C

Place the tote bottom right side up onto the tote front and back, lift the top edge of the tote bottom, remove the tape and then press to secure. Repeat securing the opposite side in the same manner. Top stitch the tote bottom to the tote front and back. Diagram D

Press sewing tape to the wrong side of the inside pocket along one edge. Remove the paper backing from the tape and turn under 1 inch, pressing tape to secure. Fold the pocket right sides out with the hemmed edge 3 inches below the unfinished edge. Top stitch down either side of the pocket. Diagram E

Press sewing tape to the wrong side of the tote back and front along the inside edges. Remove the paper backing from the tape on one side, fold the edge over 1 1/2 inches, before pressing the tape into place, insert the top edge of the inside pocket against the fold, centering it and placing it against the fold line, press the tape into place. Remove the paper backing from the tape along the opposite side of the bag and press into place. Topstitch; 1 ¼ inches from the top edge and again 1 inch from the top. Diagram F

Press sewing tape to the wrong side of the 3 edges of the outside pocket. Turn the edges in ½ inch, fold back and remove the paper backing from the tape, refold and press tape to secure. Press sewing tape to the wrong side along the remaining edge. Turn the edge in 1 ½ inches, remove the paper backing from the tape and refold pressing the tape to secure. Top stitch; 1 ¼ inches from the top edge and again 1 inch from the top. Diagram G

Center the pocket on the front of the bag, against the bag bottom. Use sewing tape to hold in place if desired. Top stitch. Diagram H

Fold each of the handles in half lengthwise, open the fold and fold each of the edges towards the center fold. Refold in half and use sewing clips or sewing tape to secure. Topstitch down either side. Diagram I

Sew straps to the front and back of the bag, placing them 5 inches in from each edge. Sew an ‘x’ to secure straps. Diagram J

With right sides together stitch the side seams of the bag. Take the time to match the bag bottom seams carefully for a professional look. Press the seams open using a pressing cloth. Diagram K

Fold the bottom corners of the bag and stitch. Diagram L

Turn the bag right side out. Measure the bottom of the bag and cut a piece of cardboard or other stiff material ¼ inch smaller all around and insert into the bottom of the bag to provide additional support.

Sew snap closure to center front opening of the bag.

Aluminor Tote BagAluminor Tote Bag

 

 

 

 

 

 

Witchy Poo Boots with oly-fun*

· Comments (37)

Witchy Poo Boots

Witchy Poo Boots

Suitable for both indoor and outdoor decorating; tuck Witchy Poo Boots under a doorway, furniture, over a cupboard door in your car trunk or anywhere else you think might be fun. Weighted base holds them in place. Happy Halloween everyone.

Supplies & Tools:

Directions:

  • Using the patterns provided cut out four boot pieces.  To request a pdf of the Witchy Poo pattern simply leave a comment asking for one and I’ll do my best to send you the pattern in a timely fashion as my mother used to say. 
  • Stitch rick rack to each of the boot fronts and stitch lines along heels as indicated on the pattern.
  • With right sides together stitch each of the boots together. Clip curves, turn right side out & press
  • Insert fiberfill into boots leaving a 2” space along the top edges.
  • Pin two 8 x 18 inch sections of Oly-fun™ to top edges of the boots, right sides together. Stitch along the sides and bottom edges of the rectangle. Note: Space the boots 2 inches apart. Turn right side, press then top stitch.
  • Stitch along the top edge, leaving a 2 inch opening. Stitch a second row 2 inches down from the first row, forming a channel to fill with Poly-Pellets®.
  • Fill the channel with Poly-Pellets® then stitch the opening closed.
  • Hand stitch buttons along front edges of boots.

This post is part of the Designers Craft Connection bloghop. To see what my designer friends have created click on the Designer Craft Connection badge on the left side of my page. You will be able to hop forward and backward and see inspirational Halloween projects.

Please note:  I was provided product from Fairfield Processing to complete the project.

 

 

Sterling Silver Cuddle Pillow

· Comments (0)

Sterling Silver Cuddle Pillow1

 Don’t you want to just reach out and touch this textural pillow. Dimension is achieved not only through the wonderful Sterling Silver Pre-cuts by Shannon Fabrics but the 3D nature of the pillow design itself. Full size petal patterns as well as step by step diagrams will have you ready to sew in no time at all.

Supplies:

Two sets of Sterling Silver Cake Squares by Shannon Fabrics

One 18 inch by 18 inch Soft Touch® Pillow Insert

One yard of Structure Fusible Interfacing

One Half Ball Cover Button – Size 75

Basic Sewing, Cutting, Measuring and Pressing tools and supplies

How to:

Note:  All seams are 1/2 inch. To request the pattern, please leave a comment and I will be happy to send you a pdf of full size patterns.

  1. Choose four squares each from the Sterling Silver Cake Squares selection for the front and back of your pillow. Mix shades of grey as well as textures.

  2. With right sides together, stitch two sets of two squares together, they stitch the two sets together to form a larger square. Repeat to assemble the back of the pillow.

  3. With right sides together, stitch the pillow front and back together, leaving a 8 inch opening along the bottom edge.

  4. Insert the Soft Touch® Pillow Insert and hand stitch the opening closed.

  5. Large Petals: Choose two squares for each of five petals, one lighter grey and one darker grey. Once again mix textures. With right sides together, cover the lighter squares with Structure Fusible Interfacing, following the manufacturer’s directions.

  6. Using the pattern, trace the outline of the larger petal directly onto the interfacing.

  7. Stitch along the traced line. Trim 1/4 inch from the stitched line and turn right side out. Continue until you have created five large petals and four small petals. Note: I choose to feature the darker petals as the large petals and the reverse for the smaller petals.

  8. Using a needle and thread, stitch the five large petals together. Gather and tie off your thread.

  9. Once again using a needle and thread, stitch the four small petals together. Gather the petals and then place the smaller petals on top of the large and stitch the two layers together, sewing through the center of the petals.

  10. Following the manufacturer’s directions, cover a large half ball button with the cuddle fabric of your choice.

  11. Center the flower on top of the pillow form and using a large needle and doubled thread insert needle into the center back of the pillow and come up through the center front of the pillow and shank of the button.

  12. Insert the needle and thread back down and through a button added to the center back of the pillow. Repeat three or four times, stitching through the fabric, pillow form and buttons. Pull threads taught and insert needle back through one of the holes in the button. Wrap thread around the back of the button and tie off.

Sterling Silver Cuddle Pillow

Giant Spring Flowers with oly-fun™

· Comments (5)

Garden Party 001A


Garden Party 011A

Making giant flowers to use as chair back accents, to hang in trees, place on your front door or used as a table centerpiece is sew simple and a great idea to dress up your table or your home for Spring. I used oly-fun™ as it is cost effective and comes in so many delightfully Spring-like colors. Full size patterns and step by step written instructions as well as diagrams will help you achieve success from your first flower to your tenth. I would love to see these flowers utilized as wedding decor. They would look great as an alternative to the traditional pew bow, but honestly the options are limitless as changing the size is simply a matter of placing the pattern on your copy machine and creating whatever size you can imagine. Have fun!

 

Supplies:

oly-fun™ – Orchid, Lemon Drop, Bubblegum, Sea Green, Snow Drop

Floral wire & Wire cutters

White thread

Glue Gun

Basic sewing, cutting and pressing tools

How to:

A.  Using the patterns* and measurements provided cut out the flower petals, center ruffle and stamen strips.

B.  Top stitch using white thread around each petal

C.  Using a needle and thread with a knot on one end, stitch the five largest petals together using a large gathering stitch. Draw up the thread and distribute the gathers. Stitch back into the flower center to secure the gathers and trim away any excess thread.

D. Repeat stitching and gathering together the four smaller petals.

E.  Using a needle and thread with a knot on one end, stitch along one edge of the center ruffle using a large gathering stitch.

F.  Draw up the thread and distribute the gathers. Stitch back into the ruffle to secure the gathers and trim away any excess thread. Using the glue gun, add a drop of glue to the open edge of the center ruffle.

G. Wrap one of the  1/2″ strips around itself to form 8″ wide loops, continue until all three strips have been used. Wrap a piece of wire around the center of the loops and twist the ends together, gathering the loops together tightly at the center point. Trim away excess wire and flatten the wire ends against the back of the flower.

H. Stack the flower layers on top of each other, adding glue and pressing until the glue sets between each of the layers.

Depending on the intended use of the flowers you may want to add a tie or hanging loop. Finish your flower with a 3″ circle of matching oly-fun™ to cover the center back of the flower.

*If you would like a copy of the patterns, leave a comment with your request and I will send the pdf to you…..

 

 

Giant Spring Flower

 

This project is part of the Designer Craft Blog Connection so please take the time to see what my fellow designers have come up with to show off  all things possible with ribbon.  The icon is along the side of my blog post. Simply click forward or backward to check out what they have created.  Leaving a message is always appreciated.

Lorine

Pleated Ribbon Pillow

· Comments (12)

Offray LogoFinal Offray Ribbon

Turn simple grosgrain ribbon into a gorgeous pleated pillow masterpiece. A little math and you are on your way with complete diagrams and step by step directions.  I promise it is not that difficult.


Supplies:

Offray grosgrain ribbon – 3″ wide Navy & White, Buttons,Poly-fil® pillow form or Poly-fil® premium polyester stuffing, 1/2 yard of cotton fabric plus basic sewing, cutting and ironing supplies.

How to:

Determine the finished pillow size. To do this, take into consideration the width of the ribbon ie: Ribbon that is 3″ wide when folded will create folded  designs 3″ square. Use multiples of the 3 inches when deciding the finished size of the pillow you wish to create. The featured pillow is 15 x 21 inches.

A.  Cut ribbon three times longer than the width of the finished pillow plus 6 inches. ie: finished pillow will be 21 wide , cut ribbon 3 x 21 + 6 = 69 inches.  The pillow will be 15 inches in height so you will need 5 rows of ribbon. Starting 3″ inches from one end, place marks on the top and bottom edges of the ribbon, spacing the marks 3 inches apart. Note: If you were using a different width of ribbon you would alter the length of the spaces to match the width of the ribbon.

B. Fold the first set of markings to match the second set of markings and pin. Fold the third set of markings back towards the second set and pin. This is the first box pleat. Continue folding from left to right and then right to left until you have created the required number of box pleats. In the case of the project pillow that number would be seven.

C.  Using a thread and needle; Stitch through the center of each pleat, being sure to stitch through all layers of the ribbon. Note: The stitching is marked in red on the diagram.

D.  Turn the pleated ribbon over to what will become the front.

E.  Bring the top and bottom edges of the ribbon to meet at the center point, secure by stitching a button through all layers of the ribbon.

F.  Lay the completed strip of pleated ribbon over the top of another length of ribbon. In the case of the project, a contrasting color was used.

G.  Cut a length of fabric for the pillow front 1″ larger than the length and width of the pillow. ie: Finished pillow will be 15″ x 21″. Cut pillow front 16″ x 22″. Center the ribbon strips on top of the pillow front fabric. Stitch between and at the center of each of the pleated areas. Be sure to stitch through all layers of the ribbon and fabric.

H.  Cut two pieces of fabric for the pillow backing. Cut one the height of the pillow plus 1 inch x the width of the pillow plus 8 inches. Cut the second piece the height of the pillow plus 1 inch x the width of the pillow + 3 inches. ie: The project pillow is 15″ x 21″, cut one piece 15″ + 1″ = 16″ by 21″ + 8 = 29″ cut the second piece 15″ +1″ = 16″ by 21″ +3 = 24″. Turn over 1 inch along one of the side edges of each piece and press. Turn over a second time and top stitch.

I.  With the pillow front laying face up on a flat surface, cover with the two pillow back sections, overlapping the center edges. Stitch around the outside edge. Clip corners and turn right side out. Insert pillow form.

Depending on the finished size of the pillow you may not be able to purchase a pillow form. To make a custom size of  pillow form; cut two pieces of cotton fabric 1 inch larger than the width and length of the finished pillow. With right sides together, stitch around the outside edges, leaving a 4 inch opening. Clip corners and turn right side out. Fill with poly-fil® premium polyester stuffing to desired fullness. Stitch the opening closed. Insert the pillow form into finished pillow.

Pleated Ribbon Pillow

 Pleated Ribbon Pillow

This project is part of the Designer Craft Blog Connection so please take the time to see what my fellow designers have come up with to show off  all things possible with ribbon.  The icon is along the side of my blog post. Simply click forward or backward to check out what they have created.  Leaving a message is always appreciated.

Lorine

Cuddle Twins Pillows

· Comments (40)

Cuddle Twins Pillows Final

 

Kinda cute and Kinda goofy, these pillow stuffies are for the child with an edge. A personality that says I like my cuddle twin and they’re going with me wherever my journey might take me today. My daughter, loved Miss Piggy®  from the popular show  The Muppets® and insisted on wrapping her up like a baby doll and carrying her around for months as she was growing up. People would stop us and ask to see her baby – well let me say they were quite taken aback when Miss Piggy®  was revealed. What can I say she was a child who knew what she liked. I think she would have liked a Cuddle Twin.

Ok – what are these adorable little guys all about. Well the folks over at Shannon Fabrics got together with the great people at Fairfield and challenged us, the Master Makers of Fairfield to come up with something using their cuddle cakes. Cuddle cakes are pre-cut 10 inch squares of their warm and wonderful cuddle fabrics. Want to know how I made these cute little people?  Here you go, step by step diagrams and instructions. If you would like a full size pattern for the arms and legs, leave me a comment and I will send you a pdf.

Cuddle Twins by Lorine Mason

Supplies:

cuddle cakes 10″ pre-cuts by Shannon Fabrics, Poly-fil® 100% premium polyester fibrefill, oly-fun™ Snow White, Buttons, Ribbon, Embroidery thread, Rick Rack and Basic sewing, cutting and ironing supplies.

How to:

Cuddle Pillow Twins

A.  Gather your supplies. Choose a color from your cuddle cakes for the front and back of the pillow.

 

B.  Cut two 2 1/2 inch circles from oly-fun™. Sew oly-fun™ and buttons in position on the square of cuddle fabric that will become the front of your pillow. Sew a button for the nose and stitch rick rack for the mouth. Add large stitched X’s at the corners of the mouth. Refer to the project photo for placement guidance.

 

C.  Using the pattern provided by me if you send me a comment or cut your own version of legs . Depending on whether you are making the female version of the pillow or the male the legs/shoes vary. Once again refer to the project photo for guidance. With wrong sides together stitch the legs to the shoes and then stitch the leg fronts to a leg backs. Turn right side out and press carefully using a pressing cloth.

 

D.  Repeat to create the arms for your pillow.

 

E.  Pin the arms and legs to the pillow front, right sides together.

 

F.  Cover with the pillow back, right sides together and stitch leaving an opening between the two legs.

 

G.  Turn right side out, stuff with fibrefill and hand stitch the opening closed.

 

H.  Cut a 5 inch by 4 inch rectangle for the hair bow. With right sides together, fold the rectangle in half to measure 2.5 x 4 inches. Stitch along the 4 inch length, leaving an opening of  2″ at the center. Center the seam line and stitch across each end. Turn right side out and press carefully. Using a needle and thread, stitch across the center of the bow, using large stitches. Pull the thread taught and wrap in around the center of the bow. Cut a 1″ x 2″ rectangle of cuddle fabric. Fold into three lengthwise and wrap it around the center of the bow. Stitch the ends closed at the back of the bow.

 

I.  Stitch the bow to the top left of the pillow front.

 

As I mentioned previously, if you leave a comment and ask me for the pattern, I would be happy to send you a pdf containing the full size patterns. Have fun…. One last thing, I am a Master Maker for Fairfield and they were generous enough to supply the oly-fun™ and poly-fil for this project. Shannon Fabrics provided the cuddle cakes (C3 Very Vibrant). 

Ok – one really last thing.  There are some great prizes in conjunction with this project challenge.  Here is the information , be sure to enter for your chance to win some great prizes from Fairfield and Shannon Fabrics.

 

Cuddle Twin Final Cuddle Twins1Final

Christmas Greenery Storage with oly-fun*

· Comments (0)

Christmas Greenery Storage with oly-fun™ Final

The holidays are officially over and it is getting close to the time for our annual family event entitled ‘ Mom is having us over to dinner so we can help put away Christmas ornaments”. I will say however that the family is getting harder and harder to convince that they should help as they now have their own homes. Oh well, I guess it just might be my husband and I at this upcoming annual event. Now what to make for dinner to convince him this will be a good idea.

Part of the holiday tradition is packing the decorations up in nice, neat storage containers. I wanted something special for the lighted garland I purchased this year and oly-fun* was the perfect fabric to use when creating this simple drawstring bag. I created this quick tutorial just in case you would like to make one as well.

Supplies for Christmas Greenery Storage:

  • oly*fun™ Cherry Pop, Kiwi & Clover
  • Grosgrain Ribbon – 1 1/2 yards of 1 inch wide
  • Materials to make tag (optional)
  • Basic Sewing Supplies; Sewing machine, Iron, Pressing cloth,  Needle & Thread, Large safety pin, etc.

Instructions for Christmas Greenery Storage:

When pressing oly*fun:  Set your iron to the silk setting and always use a pressing cloth. Never touch a hot iron directly to oly*fun™. Both sides of oly*fun™ may be considered the right side of the fabric, the choice really is yours to make, however be consistent for a more finished look. All seams will be 1/2 inch unless otherwise indicated in the instructions.

A:  Cut the following pieces from oly*fun™  Cut two 20 inch by 42 inch lengths of  15(h)” x 22(w)” rectangles, one each from Cherry Pop and Clover. Cut one 1 1/2 inch by 44 inch rectangle from Kiwi.

B.  With right sides together; stitch together the Cherry Pop and Clover rectangles, stitching along the 42 inch sides.

C.  Press the seam to one side and top stitch.

D. Turn over the top edge of the bag 2 inches and press.

E.  With right sides together, stitch the center back seam.

F.  Press the seam open and finger press a crease along the sides of the bag.

G.   Box the bottom corners of the bag by folding the bottom seam line flat matching it to the sides (creased line made earlier). Stitch across the bottom fold on either side, measuring down 2 1/2 inches from the point.

H.  Turn under 1 inch at either end of the Kiwi rectangle cut earlier. Pin it to the bag, 1 1/2 inches down from the top edge. Top stitch along either side forming a casing. 

I.  Insert the ribbon through the casing. Thread the ribbon through the casing using a large pin attached to one end of the ribbon.  Decorate your bag with a handmade tag if desired.

Christmas Greenery Storage with oly-fun™Christmas Greenery Storage with oly-fun™

Embroidered Baby Ornaments

· Comments (1)

Are you looking for some great Handmade Holiday Gift ideas? If so, you have come by at just the right time. Some of my favorite bloggers and generally super creative friends have put together a plethora of ideas for you to choose from when looking for your next project. Here is just a glimpse of what you will find as you hop through the idea catalogue. As you scroll past the 99+ graphic you will find my contribution to the hop. Embroidered Baby Ornaments……

99 Handmade Holiday Gifts from your favorite DIY bloggers

 And here you are…get ready for some fast and easy sewing while creating these sure to be a wonderful edition to any tree…. Easy instructions linked to my step by step diagrams will assure success at every turn.

  Embroidered Baby Ornaments Final

What can be more exciting than a new baby celebrating their first Christmas? Babies are exciting and whether it is their first Christmas or the first Christmas that you get to meet them, it needs to be remembered with a special Christmas ornament. I chose a soft palette of colors for this duo of baby inspired ornaments and Yes, I was thinking of the latest addition to our growing family, who happens to be a girl. Choose your own color palette and with the addition of  some of your favorite embroidery stitches, built right into your sewing machine, this project will take little time and will no doubt become a holiday favorite.

 

Supplies:

 

Pattern, Wool blend felt in assorted colors,poly-fil® polyester fiberfill, HeatnBond® iron-on adhesive, Ribbon, Pompoms, Buttons, Embroidery Floss & needle. Sewing machine, Iron and Basic sewing supplies

 

How to:

 

Note: Directions are the same for both ornaments

 

A.  Cut out a front and back of the ornament from green felt using the pattern provided. Cut out the bib pocket from green felt.

 

B.   Sew parallel lines of decorative stitching on the white felt.  Fuse iron-on adhesive to the back of the embroidered felt.

 

C.  Using the pattern piece labelled ’embroidered front’ cut out from the white felt.

 

D. Fuse iron-on adhesive to the back of a piece of pink felt. Remove the paper backing from the embroidered cut out and iron to a piece of pink felt, leaving a 1/4 inch space around the outside edge.

 

E. Cut around the embroidered felt cut out leaving a 1/8 inch border of pink felt showing.

 

F.  Remove the paper backing from the pink felt. Center the pink felt cut out on top of one of the green felt pieces cut earlier and fuse, creating the ornament front.

 

G.  Lay the ornament front on top of the remaining green felt cut out, right sides out.

 

H.  Sew a blanket stitch using the embroidery thread and needle around the outside edges of the ornament, stitching the two pieces together and leaving the neckline open.

 

I.  Attach the front pocket by sewing a blanket stitch around the outside edges, leaving the top edge open. Fill the ornament with poly-fil stuffing and sew the opening closed. Embellish the ornament using the ribbon, buttons and/or the pompoms. Create a hanging loop using additional ribbon. Refer to the project photo for ideas.

 

 

Embroidered Baby Ornaments

a Rafflecopter giveaway

 

This project is part of the Designer Craft Blog Connection so please take the time to see what my fellow designers have come up with to show off this brand new line of cords.  The icon is along the side of my blog post. Simply click forward or backward to check out what they have created.  Leaving a message is always appreciated.

Lorine

 

Handmade for the Holidays – Holiday Apron Panel

· Comments (18)

NOVEMBER 9 – post at 7am PST (10am EST)
Handmade Holidays 2014 Hop Logo

Welcome to the final day of the 4th Annual Handmade Holidays Blog Hop! We hope you enjoyed the projects from the last 2 days! A few years ago we were looking online for handmade gift ideas and thought it would be great if there was a resource dedicated JUST to handmade gift ideas. Enter the Handmade Holidays hop! We’ve gathered over 100 of our creative blogger friends in the craft industry as well as some of our fellow product manufacturers to bring you a plethora of inspiring gift ideas you can make now to give to your friends, family, and colleagues. Pin and bookmark these ideas for this holiday season and to use throughout the year! Each day of the hop features approximately 30 gift projects and you can “hop” from one blog to another to check them all out.

 

Robert Kaufman Apron with Logo

Pre-printed fabric panels are very popular throughout the year, however they are especially pretty during the holidays. What to do with them can be a little more challenging. How about a quick apron project! No pattern needed, some easy measurements and few cuts and you are set to go. Let’s get started.

 

Supplies:

Rectangle fabric panel, Double folded bias tape, Jumbo rick rack, Sewing machine, Iron, Basic sewing and cutting supplies.

How To:

Trim the apron panel following the diagram. Note: that not all fabric panels are the same, adjust measurements as needed.  Diagram A Turn over the top edge of the apron one inch, press and repeat to create a double turned hem. Top stitch along the top and bottom edges of the folds. Measure 1 1/2″ from the side edge along the top and place a pin, measure 1 1/2″ from the first pin and place a second pin. Form a tuck by bringing the two pins together. Stitch across the tuck. Repeat for the opposite side. Diagram B & C Open the folds of the bias tape and pin to the sides of the apron. Starting from the top edge, release a pin and insert rick rack and repin. Continue inserting the rick rack along each of the apron sides. Diagram D Turn under the bottom of the fabric panel 1″ and press. Repeat to create a double turned hem. Top stitch along the top and bottom edges of the folds. Diagram E Cut two 60″ lengths of bias tape. Measure down 20 inches, open the fold of the bias tape and  pin along the raw edge of the apron front. Release the first pin and insert rick rack, turning under the raw edge and repin. Continue inserting rick rack along the apron front , turning under the raw edge of the rick rack when you reach the end. Top stitch down either side of the bias tape to secure the rick rack and bias tape to the apron, as well as creating the neck and waistline tie. Diagram F Holiday Apron Panel   NOVEMBER 9 – post at 7am PST (10am EST) Handmade Holidays 2014 Hop Logo Welcome to the final day of the 4th Annual Handmade Holidays Blog Hop! We hope you enjoyed the projects from the last 2 days! A few years ago we were looking online for handmade gift ideas and thought it would be great if there was a resource dedicated JUST to handmade gift ideas. Enter the Handmade Holidays hop! We’ve gathered over 100 of our creative blogger friends in the craft industry as well as some of our fellow product manufacturers to bring you a plethora of inspiring gift ideas you can make now to give to your friends, family, and colleagues. Pin and bookmark these ideas for this holiday season and to use throughout the year! Each day of the hop features approximately 30 gift projects and you can “hop” from one blog to another to check them all out. WRITE YOUR BLOG POST HERE Are you ready for lots more creative handmade gift ideas and projects?? Follow along on our blog hop! Simply click on each of the links below to be taken to that post with additional information and photos on how to create a handmade gift project. Have fun and pin away! Clearsnap  Westcott  Scrapbook Adhesives by 3L  Ellison Educational Equipment  ICE Resin  Neat and Tangled  Therm O Web  Walnut Hollow  Elizabeth Craft Designs  Rowland Technologies  Graphic 45  Hydrangea Hippo   Pink and Main  The Buckle Boutique  Tami Mayberry Art & Design – Tami Mayberry  Jamie Dougherty – Jamie Dougherty Designs  Elizabeth Craft Designs – Raquel Mason  Meagan – The Charming Farmer  Scrapbook Adhesives by 3L – Angela Ploegman   Carolyn Dube – A Colorful Journey  Pink and Main – Mistyana Wright  The Buckle Boutique – Niki Wilson  It’s Sew Lorine – Lorine Mason   ‎ Therm O Web – Andy Knowlton  L. Grace Lauer – Uniquely Grace  Clearsnap – Meihsia Liu Oh Snap Lizzie – Lizzie Sanchez Graphic 45 – Katie Zoey Ho Charity Wings ICE Resin – Tatiana Allen Polly Carlson – Pieces by Polly Ellison Educational Equipment – Jan Hobbins  RoseRedd Paper Studio – Rochelle Washington a Rafflecopter giveaway

Follow our Handmade Holidays Gift Ideas Pinterest board for even more inspiration!

Follow Jennifer Priest of RainMaker Media Works + Hydrangea Hippo’s board Handmade Holidays on Pinterest.

 

A huge thank you to our sponsors for this hop – please visit their blogs & websites below and follow them. And be sure to come back tomorrow for another 30+ amazing Handmade Gift Ideas!

Handmade Holidays 2014 Hop Logo SPONSORS 300dpi

Clearsnap || Ellison Educational Equipment || Walnut Hollow || Graphic45 || Westcott || ICE Resin || Therm O Web || Rowland Industries || Scrapbook Adhesives by 3L || Pink and Main || Elizabeth Craft Designs || The Buckle Boutique || Neat and Tangled

Additional Sponsorship provided to bloggers by:

Sakura || Fairfield Processing