Lorine Mason - Designer, Author, Innovator

Archive for Prym Dritz

Aluminor Tote Bag

· Comments (0)

Aluminor Tote Snapshot

Aluminor Tote Bag

Aluminor Gold & Silver – 1 ½ yards each

Sewing & Craft Tape – ¼ inch wide by Prym

Snap Fastener – Size 10 by Prym

Black Thread

Plastic or other stiff material for bag bottom support

Sewing Machine

Getta Grip® Sewing Clips by Prym

Sheer Pressing Cloth by Prym

Basic Sewing, Cutting, Measuring & Pressing Tools

Cut the following:

Gold                                                                                                      Silver

One 16 inch x 30 rectangle –  bag bottom                              Two 20 inch x 30 – front and back of the tote

One 8 ¼ inch x 20 ½ inch rectangle – front pocket

One 12 inch square –  inside pocket

Two 6 inch x 30 inch rectangles –  handles

All seams are ½ inch unless otherwise notes. Use sewing & craft tape to secure items before sewing whenever possible. Sewing clips should be used in place of pins so as not to leave marks in the fabric. Always use a pressing cloth between the fabric and your iron. Iron should be on synthetic setting.

Using the diagrams as a guide; cut notches into front and back sections of the tote and tote bottom. Diagram A

Press sewing tape to the wrong side of the tote bottom along the inside edges. Remove the paper backing from the tape and turn under both edges ½ inch, pressing tape to secure. Apply tape to the top of the folded edge. Diagram B

With wrong sides together stitch the tote front and back together along the bottom edge. Use the pressing cloth and press the seam open. Diagram C

Place the tote bottom right side up onto the tote front and back, lift the top edge of the tote bottom, remove the tape and then press to secure. Repeat securing the opposite side in the same manner. Top stitch the tote bottom to the tote front and back. Diagram D

Press sewing tape to the wrong side of the inside pocket along one edge. Remove the paper backing from the tape and turn under 1 inch, pressing tape to secure. Fold the pocket right sides out with the hemmed edge 3 inches below the unfinished edge. Top stitch down either side of the pocket. Diagram E

Press sewing tape to the wrong side of the tote back and front along the inside edges. Remove the paper backing from the tape on one side, fold the edge over 1 1/2 inches, before pressing the tape into place, insert the top edge of the inside pocket against the fold, centering it and placing it against the fold line, press the tape into place. Remove the paper backing from the tape along the opposite side of the bag and press into place. Topstitch; 1 ¼ inches from the top edge and again 1 inch from the top. Diagram F

Press sewing tape to the wrong side of the 3 edges of the outside pocket. Turn the edges in ½ inch, fold back and remove the paper backing from the tape, refold and press tape to secure. Press sewing tape to the wrong side along the remaining edge. Turn the edge in 1 ½ inches, remove the paper backing from the tape and refold pressing the tape to secure. Top stitch; 1 ¼ inches from the top edge and again 1 inch from the top. Diagram G

Center the pocket on the front of the bag, against the bag bottom. Use sewing tape to hold in place if desired. Top stitch. Diagram H

Fold each of the handles in half lengthwise, open the fold and fold each of the edges towards the center fold. Refold in half and use sewing clips or sewing tape to secure. Topstitch down either side. Diagram I

Sew straps to the front and back of the bag, placing them 5 inches in from each edge. Sew an ‘x’ to secure straps. Diagram J

With right sides together stitch the side seams of the bag. Take the time to match the bag bottom seams carefully for a professional look. Press the seams open using a pressing cloth. Diagram K

Fold the bottom corners of the bag and stitch. Diagram L

Turn the bag right side out. Measure the bottom of the bag and cut a piece of cardboard or other stiff material ¼ inch smaller all around and insert into the bottom of the bag to provide additional support.

Sew snap closure to center front opening of the bag.

Aluminor Tote BagAluminor Tote Bag